Setting Bandwidth Limits on a WiFi Network
In the UniFi Controller, head to Settings – Profiles and click “Create New Bandwidth Profile” Give the new bandwidth profile a name and the desired…
In the UniFi Controller, head to Settings – Profiles and click “Create New Bandwidth Profile” Give the new bandwidth profile a name and the desired…
In the UniFi Controller, head to Settings – Profiles and click “Create New Bandwidth Profile” Give the new bandwidth profile a name and the desired…
Today, we are going to route only specific types of traffic into the VPN we set up HERE. NOTE: This form of routing to a…
In our last tutorial, we set up a privacy VPN in the VPN Clients section of our UniFi console. Today, we are going to route…
Using a privacy VPN in your network can enabled you do so many things like routing certain devices or networks through the VPN for privacy…
When you cannot use a hardwired connection with a new AP, you can have it mesh connect to the other APs on site. By default,…
This guide would be used to add someone like an internal IT rep to access the UniFi hardware at their sites. This can also be…
Recently, we set up a firewall rule that blocks my IoT VLAN from communicating with any device on the trusted LAN network. Now, I want…
By default, UniFi gateways allow traffic from anywhere to all. While this is easy for a basic setup, you may want to block certain networks…